Back to overview

Westfalia

Westfalia GSE 75-06-177

Assortment
Separators
Category
Cream separators
Stock number
STN15574
Type
GSE 75-06-177
Year of construction
2011
Capacity
20.000 liter per hour
Beer separator - clarifier, self-cleaning. Including bowl, bowl speed: 7.250 rpm, motor cover, solids cyclone with a Seipec eccentric screw pulp outfeed pump, 3 x centrifugal pump, piping,co2 injection valve for blanketing, turbidity sensor , pressure transmitter, Vibro sensor. Flow transmitter, flow control valves, bypass valve, sampler on in and outlet. Maneuvering water valves. Set of needed tools with ring key and pressing tool. Free standing control panel with PLC Siemens Simatic S7-300 controls and frequency controllers of 2 pumps and separator. Centrifugal pump 1: GEA TP2050-200-2-E-K-E-GO-DN65/50-J-J, impellor 200 mm, connections In: 3,0" Din - Out: 2,5" Din. Centrifugal pump 2: GEA TP3050-150-2-E-K-E-GO-DN65/50-J-J, impellor 150 mm, connections In: 3,0" Din - Out: 2,5" Din. Centrifugal pump 3: NN, impellor 120 mm, connections In: 2 "Din - Out: 2" Din. Capacity: 10hl to 20hl/h. With documentation. Excluding: touchscreen in control panel, precooler PHE.

Can LDFE help me with the installation?

Yes, if desired our mechanics can install the equipment at your premises . Also, we can offer long-distance assistance by giving instructions by video call or remote control (when installed).

What do the conditions ‘refurbished’, ‘good running’ and ‘as is’ mean?

We can offer our machinery in three conditions: ‘refurbished’,  ‘good running’ and ‘as is’. ‘Refurbished’ refers to a complete revision of a used machine to give it a second life. Our standard procedure when completely refurbishing a used machine is:

  • Strip down to the frame: blasting and spraying of steel components
  • All component wear: replacement of bearings, bushes and gaskets
  • Replacement of damaged or worn components
  • New cabling and control systems (latest updates)
  • 6 month warranty
  • Guaranteed spare parts supply for 5 years
  • Optional: supervision of commissioning and operator training
  • Optional: CE marking
  • Optional: custom modifications

Buying a ‘good running’ machine is a cheaper solution. In this condition, we do not completely overhaul the machine,  but do the necessary works to get the machine in working condition. The machine is tested in our workshop and components are only replaced if necessary. This price is always subject to conditions, as on occasion it becomes evident during the tests that there is an expensive fault. If this is the case, the buyer receives a quotation for the additional costs and is also given the option to cancel the purchase.

Machines are almost always sold ex-factory and can be deployed in the same condition in which we bought them: ‘as is’. However, the machine has not been inspected by us and there is no guarantee of its current condition. We always recommend that a machine is inspected prior to purchase and only to buy ‘as is’ if you have a thorough knowledge of machines. We can always tell you whether we purchased the machine in operating condition or whether it had already been decommissioned. Documentation is not always included and can only be supplied if it was present at the time of purchase.

Can I trust used machines?

We have been dealing with used machines since 1996 from the same place we started the business and growing every year. If a (small) problem arises, we also try to find a solution with our customers. We always have been a reliable partner due to our experience with used machinery.

Can LDFE also offer new machines?

Yes, in particular process equipment such as pasteurisers, standardisation equipment, CIP units, Cheese UHT unit etc. A hybrid form of new and rebuild is also possible.

Contact us!

Contact details

+31(0)348-558080
info@lekkerkerker.nl

Address

Handelsweg 4
3411 NZ Lopik, The Netherlands

Opening hours

Mon-Thu: 07.30 - 17.00 UTC+1
Fri: 07.30 - 16.30 UTC+1