Back to overview

Tetra Pak

Tetra Pak Unique

Other equipment
Valves and swingbend panels
Stock number
Year of construction
Valve manifold with Mix proof valves Tetra model Unique and single seat valves unique ssv all with 'Think top' heads. 3 lobe Pumps (Alfa-laval model SRU year 2013) for milk and cream and centrifugal pump and (E&H) Mass and Magnetic flow transmitters. This flexible valve manifold to receive raw milk and distribute it over 6 tanks and at the same time distribute pasteurized skim milk or cream from the same tanks. The milk can be standardised by mixing cream and milk together, total Mixproof design. There are 8 in and outgoing lines from the tanks numbered SL1-8. (See the P&ID for clarification). 6 lines: SL6 Pasteurised Cream in to the tanks 40m3 38mm (in front of tanks) SL3 from pasteurizer to tanks 76mm SL1+SL2 input milk from reception units 102mm SL3 from tanks to the milk pasteurizer 76mm SL4 Skimmilk out 0.5-30m3/h 76mm with Mass flow transmitter SL5 pasteurised cream out 0.5-10m3/h 51mm with Massflow transmitter SL8 pasteurised Milk out 40m3/h 76mm with magflow transmitter. SL7 = the line that can combine all pipes SL4-5-8 to be send to separate department/ SL4 and SL5 skimmilk and cream both have a mass flow transmitter so is used to standardize the milk at the outgoing line. + 2 CIP return lines for tanks and piping with cip return pump. Compressed Air distribution, cables, pipework all included. Insulation of piping excluded.

Can LDFE help me with the installation?

Yes, if desired our mechanics can install the equipment at your premises . Also, we can offer long-distance assistance by giving instructions by video call or remote control (when installed).

What do the conditions ‘refurbished’, ‘good running’ and ‘as is’ mean?

We can offer our machinery in three conditions: ‘refurbished’,  ‘good running’ and ‘as is’. ‘Refurbished’ refers to a complete revision of a used machine to give it a second life. Our standard procedure when completely refurbishing a used machine is:

  • Strip down to the frame: blasting and spraying of steel components
  • All component wear: replacement of bearings, bushes and gaskets
  • Replacement of damaged or worn components
  • New cabling and control systems (latest updates)
  • 6 month warranty
  • Guaranteed spare parts supply for 5 years
  • Optional: supervision of commissioning and operator training
  • Optional: CE marking
  • Optional: custom modifications

Buying a ‘good running’ machine is a cheaper solution. In this condition, we do not completely overhaul the machine,  but do the necessary works to get the machine in working condition. The machine is tested in our workshop and components are only replaced if necessary. This price is always subject to conditions, as on occasion it becomes evident during the tests that there is an expensive fault. If this is the case, the buyer receives a quotation for the additional costs and is also given the option to cancel the purchase.

Machines are almost always sold ex-factory and can be deployed in the same condition in which we bought them: ‘as is’. However, the machine has not been inspected by us and there is no guarantee of its current condition. We always recommend that a machine is inspected prior to purchase and only to buy ‘as is’ if you have a thorough knowledge of machines. We can always tell you whether we purchased the machine in operating condition or whether it had already been decommissioned. Documentation is not always included and can only be supplied if it was present at the time of purchase.

Can I trust used machines?

We have been dealing with used machines since 1996 from the same place we started the business and growing every year. If a (small) problem arises, we also try to find a solution with our customers. We always have been a reliable partner due to our experience with used machinery.

Can LDFE also offer new machines?

Yes, in particular process equipment such as pasteurisers, standardisation equipment, CIP units, Cheese UHT unit etc. A hybrid form of new and rebuild is also possible.

Contact us!

Contact details



Handelsweg 4
3411 NZ Lopik, The Netherlands

Opening hours

Mon-Thu: 07.30 - 17.00 UTC+1
Fri: 07.30 - 16.30 UTC+1